linux:debian:hardware:basis

2014-04-11

Debian OS-Basis-Installation auf Blech

1. bei Partitionierung:

 <Go back>

2. dann muss die

 "debconf priority" auf "low"
 gesetzt werden!!!

3. Partitionierung:

 auf _jeder_ HDD eine leere Partition anlegen
 Typ: "gpt"

4. zusaetzlich auf jeder HDD eine „EFI“- oder besser: „BIOSgrub“-Partition anlegen

 Size: 200 MB
 Position: at beginning
 Name: EFI bzw. BIOSGRUB
 Use as: FAT32 bzw. BIOSGRUB
 nur auf 1. HDD Mountpoint: /boot/efi bzw. none
 alle anderen HDDs kein Mountpoint
 Bootable flag: on
 

5. auf allen HDDs weitere Partition anlegen:

 Size: 1 GB
 use as: physical Volume for RAID
 

6. Restkapazitaet auf den HDDs als weitere Partition

 use as: physical Volume for RAID
 

7. Software-RAID konfigurieren:

  • RAID1 aus allen 1GB-Partitionen
  • RAID5 bzw. RAID6 aus allen restlichen RAID-Partitionen (Ausnahme: SSDs!)

8. RAID1-Verbund md0 als ext3,noatime nach /boot mounten

9. RAID5/6-Verbund md1 als physical Volume for LVM

10. LVM auf md1 konfigurieren:

  lv_swapfs - 2 GB
  lv_rootfs - 10 GB
  lv_varfs - 10 GB
  

11. nach Partitonierung muss die

  debconf priority
  wieder auf "high"
  gesetzt werden.
  

12. nur SSH-Server installieren

13. GRUB in MBR installieren

14. nach Reboot:

  • dpkg-reconfigure grub-pc
  • in /etc/default/grub „quiet“ loeschen
  • auf _jeder_ HDD GRUB installieren!


← zurück

  • linux/debian/hardware/basis.txt
  • Zuletzt geändert: 2017-04-25 14:47
  • von 127.0.0.1